Food and pharmaceutical industry delivery cases

Complete Transmission Project for Low-Fragmentation Dilute Phase Pipeline of Powdered Sugar in Yang

Industry:Food and pharmaceutical industry delivery casesContact Number:156-6277-7102Contact Person:Manager Z

In the conveying process of powdered materials such as powdered sugar, balancing efficiency and material integrity has long been a challenge faced by the industry. A food processing company once experienced a high crushing rate of powdered sugar due to traditional mechanical conveying, affecting the taste and appearance of the final product. At the same time, dust pollution also brought environmental and health risks. To address this pain point, Head Powder, leveraging its technical expertise in pneumatic conveying, has launched a low-crushing dilute-phase pipeline pneumatic conveying system specifically designed for powdered sugar, achieving efficient, clean, and low-loss material transfer.

Case Background

江苏扬州糖粉低破碎稀相管道输送成套工程

A large baking ingredient manufacturer needs to transport a large amount of powdered sugar from the grinding workshop to the packaging line every day. During the operation of the original screw conveyor, powdered sugar granules were subjected to intense compression and friction, with a crushing rate exceeding 15%, resulting in increased fine powder, higher caking risk, and unstable product quality. In addition, poor equipment sealing and severe sugar powder flying not only waste raw materials but also increase cleaning costs and occupational health risks. Companies urgently need a solution that can both improve conveying efficiency and significantly protect the integrity of powdered sugar granules.

Customer pain point analysis

江苏扬州糖粉低破碎稀相管道输送成套工程

Powdered sugar is a fragile, moisture-absorbing powder material that is extremely sensitive to mechanical forces during transportation. Traditional mechanical conveying methods (such as screw and bucket lifting) can easily cause pellet breakage, which in turn affects product solubility and taste. At the same time, powdered sugar dust carries an explosion risk and is prone to moisture and clumping, placing extremely high demands on the sealing and environmental control of the conveying system. When looking for alternatives, clients focus on the following points:
- Material damage rate must be below 5%;
- Fully sealed system to prevent dust leakage;
- Controllable temperature rise during conveying to prevent melting of powdered sugar;
- The equipment is easy to clean and meets food hygiene requirements.

Product solutions

江苏扬州糖粉低破碎稀相管道输送成套工程

Head Powder adopts a low-crush dilute-phase pipeline pneumatic conveying system according to customer requirements. This solution uses low-pressure, high-speed airflow as its power to suspend powdered sugar in pipelines for dilute phase transport. The design focused on optimizing the following aspects:
-Airflow speed control:By accurately calculating the airflow velocity inside the tube, it is achieved just at the critical value for suspension conveying, reducing the collision energy between particles and the pipe wall, thereby lowering the crushing rate, which is measured and kept within 2%.
-Elbow and pipe inner wall treatment:Uses a large curvature radius elbow and food-grade ultra-slip lining material to reduce impact force during material rotation and prevent sugar powder adhesion.
-Fully sealed system:From the feed inlet to the discharge port, all connections use sealed structures, combined with dust removal and filtration devices to achieve dust-free operation and meet environmental and hygiene requirements.
-Intelligent Control:Equipped with a PLC control system, it monitors conveying pressure, wind speed, and material flow in real time, automatically adjusts parameters, helping maintain normal operation and reduce energy consumption.

After the system was put into use, the customer's sugar powder conveying process became stable, the crushing rate dropped below 2%, dust emissions were zero, the workshop environment improved significantly, and overall energy consumption was reduced by about 20% compared to the original equipment. Head Powder's low-crushing dilute-phase pneumatic conveying technology offers an economical and reliable option for conveying powdered sugar and similar fragile powders.

We have solved the conveying challenges faced by competitors in the industry

Materials and operating conditions are retained, and engineers provide selection recommendations based on similar project experience. Response within 2 hours on working days, and a solution provided within 24 hours.

156-6277-7102
Service hotline
156-6277-7102 24-hour online consultation
WeChat consultation
WeChat consultation QR code
Back to top